Pasta finish 3D AAT 502 Finishing Polish Livrare rapidă

Descriere

IMPORTANT: Always work on a cool clean surface in the shade.Body Shops – Using a rotary polisherStep 1: First perform compounding to remove sanding marks and/or serious paint defects before polishing.Step 2: Attach preferred foam polishing or finishing pad to backing plate on rotary polisher and set speed setting to low or medium.Step 3: Apply 4-5 dime sized drops of product onto the center of the face of buffing pad. Press the face of the pad against a body panel, turn the polisher on and spread the product over the area to be worked, about 2’ by 2’.Step 4: After spreading polish over area to be worked – turn polisher to a medium to high speed and begin making overlapping passes. Move polisher over paint using a slow to medium arm speed. Monitor defect removal as you buff. Once paint defects are removed to your satisfaction, stop buffing and remove any excess product using a clean, soft microfiber towel.Detail Shops/Enthusiasts – Using an orbital polisherStep 1: Prepare the surface by first washing, drying, and removing any above surface bonded contaminants using detailing clay or a clay substitute. If there are serious paint defects like deep swirls, scratches, water spots or heavy oxidation – use a 3D compound as your first step.Step 2: Attach preferred foam polishing or finishing pad to backing plate on orbital polisher and set speed setting to low or medium.Step 3: Apply 4-5 dime sized drops of product onto the center of the face of buffing pad. Press the face of the pad against a body panel, turn the polisher on and spread the product over the area to be worked, about 2’ by 2’.Step 4: After spreading polish over area to be worked – turn polisher to a medium to high speed and begin making overlapping passes. Move polisher over paint using a slow to medium arm speed. Monitor defect removal as you buff. Once paint defects are removed to your satisfaction, stop buffing and remove any excess product using a clean, soft microfiber towel.